This method can determine the amount of specific metal and metalloid particulates in the workplace atmosphere. Wipe samples are collected using grab sampling techniques. Samples are desorbed or digested using water extractions or mineral acid digestions. Elemental analysis of the prepared sample solutions is performed by atomic absorption or emission spectroscopy. The identification and quantification of the particulate is directly determined as the element.
No Obligation Quotation for Analytical Services
If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.
| Hold Times, Preservatives, Preps, Collection, Analytical & Documentation | |
|---|---|
| Holding Time: | Not noted in method |
| Preservatives: | Not noted in method |
| Required Preps: | Smear tabs or wipe filters. |
| Collection Method: | Wipe a surface area covering 100 cm². |
| Analytical Methodology: | Atomic Absorption or Emission Spectroscopy. |
| Documentation: | 
ID-121
|
| Analyte | Formula | CAS Number | Detection Limit | |
|---|---|---|---|---|
| Tellurium | Te |
13494-80-9 |
0.2 |
µg/mL |
| Aluminum | Al |
7429-90-5 |
0.3 |
µg/mL |
| Iron | Fe |
7439-89-6 |
0.03 |
µg/mL |
| Lead | Pb |
7439-92-1 |
0.05 |
µg/mL |
| Lithium | Li |
7439-93-2 |
0.004 |
µg/mL |
| Magnesium | Mg |
7439-95-4 |
0.01 |
µg/mL |
| Manganese | Mn |
7439-96-5 |
0.01 |
µg/mL |
| Molybdenum | Mo |
7439-98-7 |
0.04 |
µg/mL |
| Nickel | Ni |
7440-02-0 |
0.1 |
µg/mL |
| Platinum | Pt |
7440-06-4 |
2 |
µg/mL |
| Potassium | K |
7440-09-7 |
0.02 |
µg/mL |
| Silver | Ag |
7440-22-4 |
0.005 |
µg/mL |
| Sodium | Na |
7440-23-5 |
0.009 |
µg/mL |
| Thallium | Tl |
7440-28-0 |
0.05 |
µg/mL |
| Tin | Sn |
7440-31-5 |
0.1 |
µg/mL |
| Titanium | Ti |
7440-32-6 |
||
| Antimony | Sb |
7440-36-0 |
0.1 |
µg/mL |
| Barium | Ba |
7440-39-3 |
0.5 |
µg/mL |
| Cadmium | Cd |
7440-43-9 |
0.004 |
µg/mL |
| Cesium | Cs |
7440-46-2 |
||
| Chromium | Cr |
7440-47-3 |
0.04 |
µg/mL |
| Cobalt | Co |
7440-48-4 |
0.04 |
µg/mL |
| Copper | Cu |
7440-50-8 |
0.005 |
µg/mL |
| Gold | Au |
7440-57-5 |
0.05 |
µg/mL |
| Hafnium | Hf |
7440-58-6 |
||
| Yttrium | Y |
7440-65-5 |
0.7 |
µg/mL |
| Zinc | Zn |
7440-66-6 |
0.01 |
µg/mL |
| Zirconium | Zr |
7440-67-7 |
8 |
µg/mL |
| Bismuth | Bi |
7440-69-9 |
0.2 |
µg/mL |
| Calcium | Ca |
7440-70-2 |
0.03 |
µg/mL |
| Indium | In |
7440-74-6 |
0.1 |
µg/mL |
| Selenium | Se |
7782-49-2 |
0.3 |
µg/mL |
* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.