Method 5010

Bromoxynil and Bromoxynil Octanoate by HPLC/UV

This method is for the determination of bromoxynil and bromoxynil octanoate. The sample is collected on PTFE membrane filters, and extracted with 3 mL acetonitrile for 60 minutes, followed by HPLC analysis with ultraviolet detection. The working range is 0.02 to 0.3 mg/m³ for a 100-L air sample. This method permits the simultaneous determination of both analytes.

(NIOSH Issue 2: 15 August 1994)


No Obligation Quotation for Analytical Services

If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.

Method Data

Hold Times, Preservatives, Preps, Collection, Analytical & Documentation
Holding Time:   At least 25 days @ 4 °C in the dark.
Preservatives:   Keep refrigerated and store in the dark.
Required Preps:   PTFE membrane filter, 2-µm
Collection Method:   PTFE membrane filter: 2L - 400L @ 1-3 L/min.
Analytical Methodology:   HPLC/UV
Documentation:   5010

Analyte List*

Analyte Formula CAS Number Detection Limit
Bromoxynil Octanoate, Solid

* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.